Soybean Oil Mill Plant

Seed cleaner is used to remove the big and small impurities such as iron, stones, clump, dust, plant leaf, etc.

We manufacture both Rotary & Multi-deck vibrating type Seed Cleaner using optimal grade materials and cutting-edge technology.

The De-stoner is used to separate seed sized stones and heavy particles like Glass, metals etc. which are heavier than the seed using a Vacuum system.

We provide a Vibratory type Destoner with Steel box frame with sieve slope adjustment supported on rubber blocks with durable wooden sieve frames, covered with steel screens, aluminum baffles and cleaners. Complete with inspection windows and adjustable stone separation device.

For cracking the Seeds & Separating the loose hulls from cracked soybean. This process helps improve extrusion efficiency & also improves meal protein levels.

Side plates are made up from thick M.S. Plate duly finished on Horizontal Boring Machine. Steel cast bearing Body with Micro adjustment system on Rolls for adjusting the gaps between two rolls. Brushes are provided for cleaning the surface of Rolls. Frame in Carbon steel, rolls in chilled Cast Steel dynamically balanced with 20 mm deep harden portion

Soybean Extruder helps condition the Soybean prior to pressing. This is done to reduce the anti-nutritional factors such as trypsin inhibitors, urease and lectins that badly affect the digestive efficiency of Soya meal.

We provide a single screw squeezing type Dry extruding machine. The cracked soybeans are heated to about 150° C – 170° C in a time span of 10 – 15 seconds. This sudden heating helps achieve the premium grade full fat extruded soybean.

Advantages of Extruder Technology:

• High Protein Meal
• 100% Hexane Free
• Acceptable Urease Content
• Dry Extrusion
• Premium Grade Meal

Soybean obtained after the preparatory process can be used as a raw material for Soybean Oil Extraction.

The soybean contains 18 – 20 % oil content. After a single stage pressing, about 5 – 5.50% residual oil in the soybean meal which will be used in animal & poultry feed.

Soybean oil expeller mainly uses the change of screw pitch size and screw thread deep to reduce the volume between the screw pitch and the pressing chamber, the raw material gets pressure, thus the oil is squeezed out of the material.

The machine crushes and squeezes oil from the mustard seeds without adding any chemicals & Heat. Therefore, the oil produced by the machine is Cold Press, Healthy and Free from any sort of toxins.

The crude soybean oil contains suspended solids (foots) that need to be removed. The solids are removed by a filter press machine, as it has fine-mesh clothes which can separate liquids and solids using pressure.

We design and manufacture Plate type / Plate & Frame type Filter Presses. The filter press plates made by our company is made of quality Cast Iron, Stainless Steel or Polypropylene material.

The soybean meal is disintegrated into fine powder in a Hammer Mill. This helps to improve the efficiency of cooling.

We provide Hammer Mill with Swinging type hammer made of Hardened Steel. The mesh size can be adjusted to get the desired particle size of Soya meal.

After disintegrating, the powdered meal will pass through a meal cooler where the meal is cooled for safe storage.

We provide Horizontal Rotating drum type Meal cooler, with aspiration blower, drive, Heavy-Duty frame and all necessary accessories to cool the powdered low fat Soya Meal. The Rotating drum is made of Stainless Steel.

Bucket elevators are used to vertically transport large amounts of material to different heights without creating dust, then dump it.

We offer a well designed Chain & Belt Type Bucket Elevator manufactured with MS or SS Material. The Buckets can be either of MS, SS or Nylon material.

Screw Conveyors are extensively used for transporting material from one place to another.

Entire range is fabricated using premium quality raw material and sophisticated technology by our skilled professionals.

A Control Panel is an assembly to control all the electric motors from a central location. It consists of multiple enclosed sections having a common power bus and with each section containing a combination starter, which in turn consists of motor starter, fuses or circuit breaker, and power disconnect. It also includes push buttons, indicator lights, variable-frequency drives, programmable logic controllers, and metering equipment.